Bluetooth Settings

In BT settings, you can turn the bluetooth setting On or Off. When turning on bluetooth, the status bar will display the bluetooth icon at the top left side of the screen. The Visiblity can be turned off if you no longer want your WTX to be discoverable to other bluetooth enabled devices.

Display

• Main menu style: Select how many Apps will be shown in the menu screen. Choose from 1 app or 4 apps.
• Brightness: Adjust the display brightness from level 1 to level 5. The default level is 3.
• Screen time out: Set how long the WTX will wait before the backlight turns off.     

Clock

• Clock type: Select a watch face
• Date: Set the current date.
• Time: Set the current time.
• Time format: Select 12-hour format or 24-hour format.
• DST: Set the Daylight Savings option on/off.

Change the Watch Face

1. Touch and hold the Watch Screen, and swipe the screen or tap the arrow button to view available watch faces.
2. Tap the watch face to select it.

Sport

• Unit: Select imperial or metric units for running and cycling application.
• Lap length: Select your preferred lap length

• Satellite: This option will be removed from the latest firmware version.

Language

Select a display language for the WTX Supported Languages:
English, French, Spanish, Korean, Italian, German, Chinese.

Motion

Set the WTX screen to turn on when you raise your arm, and turn off when you lower your arm.

Style

Switch the menu interface style.

Calendar

Depending on the month, the calendar may not be shown wholly because of the screen size

Notifier

View the dismissed notifications from your smartphone which is connected to the WTX. When you run the Notifier, a list of notifications dismissed earlier will be shown on the screen. Tap the specific notification in the list to view its detail, and it will automatically be removed from the list.

On the notification view, swipe the screen from the right and you can use the remote control menus for the selected App notification.

For more information about these menus, see section 2.7.

Reset

Reset to factory original Settings.

About

Product information
Serial Number, Bluetooth Address, Software Version, etc.

By tapping anywhere around the distance number on the screen
(*refer to the red box in image below), you will be able to alternate Golf screens A,
B and C shown below.

Dynamic Green view                             Big Number Mode​                             Dual Green View​

with Distances

• Dual Green View (C) will be available only when there are both of Left and Right Greens on your fairway.
• In case there are two greens on your fairway, you can quickly choose the green by
  tapping the “L” and “R” beside the flag image  in the screen (A).

From the Play Golf Mode, tap the    image or swipe the screen from right to left to view the Hole Layout and Hazard information.
Tap the    image or swipe the screen from left to right to come back to the previous screen

To turn on the screen, press

 

 

• The screen may not turn on despite raising your arm or it may turn off too soon. In this case, it’s recommended that you lean your wrist little more towards you in order to turn on the screen.





• The screen turns off if the WTX is not used within a specified period of time. This can be changed under "Settings→ Display → Screen time out".

On the Hole Layout screen shown to the left, the red circle shows your current position. The layup arcs will also be displayed, indicating the distance from the layup arc to the pin. The three layup arcs will appear for par 4 or higher, and no layup arc will appear for par 3 hole. The distance layups are shown as 100, 150, 200 yards or meters from hole, following the current unit setting (refer to section 3.6).
※ Layup arc feature has been added as of April 2017. Please update your device if you do not have this feature.

A layup arc is especially useful when a golfer intends to hit the ball a shorter distance for a better position or to avoid a hazard or target. For example, if the WTX shows the white number of 264 at the left side of a 100 yard layup and the current unit setting is set to yards, it means you are standing at 264 yards from the 100 yard layup arc, and the 100 yard layup arc is 100 yards from the hole.

Before enabling notifications, you must connect your WTX to a compatible smartphone.
The WTX currently supports events, notifications, and messages from your smartphone.
When you receive a notification, the WTX will vibrate and the pop-up about the notification will appear on the screen.

Viewing Notifications

Tap “View” to view the notification’s detail and tap “dismiss” to view it later. The dismissed
notification can be viewed in Settings → Notifier.

Deleting Notification

Swipe the notificationview screen from right to delete the current notification.

Remote Control Notification

Swipe the notification viewscreen from left for remote control notification.

• Open : View the notification detail in your smartphone.
• Delete : Delete the notification in your smartphone.
• Block : Block the current app notifications from next time.
  You can re-enable the notification blocked in your smartphone.


• The notification might appear on the screen of WTX periodically until you
  “Delete” it in remote control notification menu or view it in your smartphone.


• The remote control notification menuwill be dependent on the app notification,
  for example, you can only see “Delete” in the specific app notification.

Managing Notification

You can use your smartphone to manage notifications that appear on your WTX.

• Apple Smartphone
  Use the notification center settings on your smartphone to select which
  notifications will appear on your WTX
• Android Smartphone
  Use the Settings → APP SETTINGS in the GolfBuddy app your smartphone
  to select which notifications will appear on your WTX

Disabling Notification

Turn the Bluetoothoff to block all of notifications from your smartphone.