How to Set Time • The time will automatically set after your unit successfully acquires satellite connection. However, you may need to update the hours based on your time zone.
• To set the clock manually, press and hold the lower right button, the numbers flashing is your time zone and the numbers below that is the time. Press the up or down arrows on the right until you see the correct time. Once the time is correct press the lower left button 4 times to get back to the main screen.
• Daylight Savings Time can be applied by pressing the upper right button (arrow/ball icon with upward arrow) or the lower right button (pen/paper icon with downward arrow) in the Time Setting Menu.
• Settings - Turn on the unit. - Hold down OK middle button. - Use down arrow button to navigate to Settings icon. - Press middle button OK - S/N will display at bottom of screen.
• Outside of box - Turn box around and serial number will be on back of box.
Technical SupportIf you are experiencing technical difficulties with the following: • Incorrect yardage • Satellite issue • Freezing
Please perform a firmware update on your unit through using GB manager. If that does not fix the issue, attempt the following steps to perform an emergency reboot: - Press the Ok button on the lower left side along with the Up and Down button on the right side at once to restart the system.