GOLFBUDDY GLOBAL Sign in
GOLFBUDDY Help>Knowledgebase>BB5

GolfBuddy Knowledgebase

Filter by
  • Incorrect Measurements • Please verify that your unit is set to the correct unit of measurement. To change the unit of measurement, please press and hold the Right(>) button while in GOLF mode. The unit will display the distance mode screen shown below. Use the (<)Left/Right(>) buttons to select between meters (M) or Yards (Y) then press OK to confirm.

    • Please make sure you have an unobstructed view of the sky.

    • If yardages are still incorrect, please update the firmware and the courses through the free GolfBuddy Manager program found here: http://www.golfbuddyglobal.com/support/downloads.asp

    • If yardages are still incorrect, please perform an emergency reboot. To perform an emergency reboot, you must be connected to a power source via USB.
    Press and hold the Power, Ok, and Down (or Up) buttons for about 12 seconds until you see progressing LED lights (red, orange, and green lights) on the bottom followed by “GolfBuddy” message.

    • If you are still experiencing issues : Service Request Registration
    URL : http://help.golfbuddy.com/sList.asp?searchproduct=19&searchcategory=1&seq=1465&page=1&searchtext=










Categories